We help the world growing since 1983

Belt Webbing Supplier: How to select and use the Belt

1. Selection of hoisting belt specifications and types. When choosing the hoisting belt specification, the size, weight, shape of the load to be lifted, as well as the hoisting method to be used and other common effects of the coefficient of use included in the calculation consideration, given the limit of the working force requirements, at the same time, the working environment, the type of load must be taken into account. The Belt Webbing supplier must select a sling of appropriate length that has sufficient capacity and can meet the usage. If more than one lifting Belt is used at the same time, the Belt Webbing supplier must select the same type of lifting Belt. The raw material of the flat lifting belt should not be affected by the environment or load. Whether accessories or soft lifting lugs are required, careful consideration must be given to matching the end of the lifting belt with auxiliary accessories and lifting equipment.

https://www.suoliwebbing.com/towing-strap-product/

2. Follow good lifting experience to plan lifting and light operation scheme before starting lifting.

3. The Belt Webbing supplier shall correctly use the hoisting Belt connection mode to properly install and connect the load in a safe manner. The hoisting Belt must be placed on the load so that the load can balance the width of the sling; The sling suture should not be placed on the hook or lifting equipment at all times, and should always be placed on the upright part of the sling to prevent damage to the tag by moving away from the load, hook, and locking Angle.

When using flat slings with soft lugs, the minimum length of the lug to be used cannot be less than 3.5 times the maximum thickness of the hook in contact with the lug, and the Angle of lug movement cannot exceed 20°. When connecting a sling with soft lugs to lifting gear, the contact part of the sling and lifting gear must be at all times unless the axial width of the sling does not exceed 75mm, and the bending radius of the lifting accessory must be at least 0.75 times the axial width of the sling.

 


Post time: Aug-17-2022