The safety belt has tensile strength and firmness. The MATCHING CLIMBING HOOK, TRIANGULAR RING AND RING ARE MADE OF medium CARBON steel PLATE AND COATED with NI-CR layer. And after high temperature heat treatment, the hardness is stronger, the Safety factor is higher, the Safety Belt Webbing pad with more waterproof function, soft and moderate, more comfortable. The safety rope with three strands of nylon rope, tensile, flexibility is obviously beyond similar products. Safety Belt Webbing is suitable for construction, shipbuilding, installation and other enterprises hanging and high operation.
Precautions for use:
1 each time the use of Safety Belt, should check the sign and certificate, Safety Belt Webbing check nylon with no cracks, seams are secure, metal parts are missing, cracks and rust, Safety rope should be hung on the connecting ring.
2. The safety belt should be hung high and used low, and prevent swing and collision, avoid sharp substances, and do not touch open flame.
3. When using more than 3m long rope, buffer should be added. When necessary, buffer, self-locking hook and speed difference automatic controller can be used jointly.
4. The hook and ring of the safety belt should be firmly hung on the fastening point during operation.
5. When using the Safety Belt in low temperature environment, pay attention to prevent the Safety Belt from becoming hard and cutting.
6. Frequent use of safety rope should be often done appearance inspection, abnormal should be replaced in time, and pay attention to the problem of rope sleeve.
7. Do not use the safety belt in knots, so as not to disconnect the safety rope from the knot when impact occurs. The safety hook should be hung on the connecting ring, not directly hung on the safety rope, so as not to cut the safety rope when falling.
8. After two years of use of the safety belt, it should be inspected according to the situation of batch purchase, the static load test of the surround-rod belt and the impact test of the safety rope. If there is no rupture, the safety rope can continue to be used.
9. Safety belt should be stored in a dry, ventilated warehouse, no contact with high temperature, open fire, strong acid, strong alkali and sharp hard objects, also do not be exposed to the sun. When moving, do not use tools with hooks and thorns, transport process to prevent sun and rain.
10. The safety belt should be cleaned frequently. It can be gently rubbed in warm water with soapy water, then rinse with clean water, and then air dry.
11. The various parts of the safety belt should not be removed arbitrarily. When replacing the new parts, the qualified parts should be selected.
12. The service life of the safety belt is 3-5 years, and it should be scrapped in advance if any abnormality is found. In the process of use, also pay attention to check, in half a year to 1 year to test once. It is required that the main parts should not be damaged. If any damage or deterioration is found, it should be reported in time and stopped to ensure operation safety.
Post time: Aug-12-2022